ICMSE 2019: 1st International Conference on Materials Science and Engineering Department of Mechanical Engineering, Dr. B R Ambedkar National Institute of Technology Jalandhar Jalandhar, India, June 11-12, 2019 |
Submission link | https://easychair.org/conferences/?conf=icmse2019 |
Abstract registration deadline | April 11, 2019 |
Submission deadline | June 1, 2019 |
Department of Mechanical Engineering under the aegis of NITJ is organizing an International Conference on Materials Science and Engineering (ICMSE) from June 11 to 12, 2019 in collaboration with Govt. Women Engineering College, Ajmer. The present conference aims at providing a leading forum for sharing original research contributions and practical developments in the field of Materials Science and Engineering so as to contribute its share for technological advancements. Globalization provides all around development and this development is impossible without technological contributions. Hence, the present conference aims at providing a leading forum for sharing original research contributions and practical developments in the field of Materials so as to contribute its share for technological advancements.
Submission Guidelines
The organizers invite papers from students, teachers, scientists and researchers in academia and industry to present the results of their research and development efforts in the field of Materials Science and Engineering. Papers must report original academic or industrial research in any of the following topics not limited to but relevant to the conference.
The presenters should submit an abstract of approximately 300 words withTimes New Roman, 12 point, fonts in Windows-based Microsoft Word (.doc /.docx) document through the following easy chair link: https://easychair.org/conferences/?conf=icmse2019 and also by attaching an e-mail to icmse2019@nitj.ac.in by mentioning the Track No. and Type of Presentation (i.e., Oral or Poster) in the mail subject with other relevant details. The abstract shall be reviewed by a peer committee. Selected manuscripts will be accepted for either oral or poster presentation. After the acceptance of the abstract, the authors are required to submit the full paper again through the same link of easy chair. All the templates and detailed guidelines are available at website (http://nitj.ac.in/icmse2019). All the presented papers will be published as conference proceedings. Selected Papers of the 1st ICMSE conference will be considered for publication in ESCI journal (Nanoscience and Technology: An International Journal) after the conference. The paper sent to the journal should contain no more than 30% data from the paper presented at ICMSE-2019. The authors will be submitting their papers to the above journal and at the same time will send an E-mail to the conference organizers as well as the Journal Editor stating that the paper has been presented at ICMSE-2019. The Peer-Review will be performed by the Journal itself.
List of Topics
Topics & Tracks
- Composite Materials: Polymer, ceramic and metal matrix composites, green composites, fibrous and particulate composites, hybrid composites, self-healing composites, micro and nano composites, nano-electronics and nano-mechanics.
- Multiscale Modelling of Materials: Molecular dynamics, Density functional theory analysis, Monte Carlo technique of atomistic modeling, meso-scale modeling, Finite element modeling (FEM) of materials.
-
Metals, Ceramics, Polymers, Bio-Materials: Manufacturing of metal, polymer, ceramic based and bio-materials with novel properties, materials for green technology, tribology & surface engineering, heat treatment, solidification processing & corrosion, powder metallurgy.
- Mechanical Properties: Fracture and damage, fatigue, dynamic fracture, dynamic behavior, tribology and wear, interfaces and interphases, creep and aggressive environment.
- The above list of topics is indicative and not restrictive.
Committees
Program Committee
-
Patron: Dr. L.K. Awasthi, Director, NITJ
Chairman: Dr. Pramod Kumar, Associate Professor, ME, NITJ
Secretary: Dr. Sumit Sharma, Assistant Professor, ME, NITJ
Joint Sceretary: Dr. Jai Gopal Gupta, HOD, ME, GWECA
Organizing committee
-
Dr. Anand Vaz
Dr. D. K. Shukla (HOD)
Dr. S.K.Tiwari
Dr. Raman Bedi
Dr. Saurabh Kango
Dr. Nitin Sharma
Dr. Manoj Kumar
Dr. Ashok Kumar
Invited Speakers
- Dr. Mohamad Reza Saeb, HOD, Department of Resin & Additives, Institute for Color Science & Technology, Tehran, Iran
- Dr. S.P Singh, Professor, Department of Mechanical Engineering, IIT Delhi
Publication
All the presented papers will be published as conference proceedings. Selected Papers of the 1st ICMSE conference will be considered for publication in ESCI journal (Nanoscience and Technology: An International Journal) after the conference. The paper sent to the journal should contain no more than 30% data from the paper presented at ICMSE-2019. The authors will be submitting their papers to the above journal and at the same time will send an E-mail to the conference organizers as well as the Journal Editor stating that the paper has been presented at ICMSE-2019. The Peer-Review will be performed by the Journal itself.
Venue
The conference will be held in the Department of Mechanical Engineering at Dr. B R Ambedkar National Institute of Technology, Jalandhar, Punjab (INDIA) from 11-12th June 2019.
Contact
All questions about submissions should be emailed to ...
Secretary:
Dr. Sumit Sharma
Email: sharmas@nitj.ac.in
Ph: +91-8146871758