ICRISET2017:Author Index

AuthorPapers
A
Abdelrhman, Omer MohamedAnalysis of Precoding Algorithms and Pilot Contamination Problem for Massive MIMO System
Agarwal, ArpitaCompressive Sensing for Natural Images
Agarwal, MohitPerformance Evaluation of Mobile Charger Using Heating Technology
Agrawal, Pushpakant M.Design Of Conical Roof Structure Of Liquid Sulphur Storage Tank
Alad, RizwanA Novel Wideband Metamaterial Absorber for S, C & X Band with Good Absorbption
Anuvadiya, MohitFeeding and Gating System Design and Simulation of Flange Roller of Hydrators for Yield Melioration
Arya, SwapnilReactive Power Compensation Using FACTS Device
Ayalani, Mulchand H.Realization of Active Neutral Point Mulitilevel Inverter Using SPWM Technique
Ayar, Vivek S.Computational Analysis of Ultrasonic Treatment of Melt for Effective Dispersion of Reinforcement Particles
B
Badgujar, AmarishNumerical Analysis on Thermal Conductivity of Vapor Chamber Using an Iterative Approach
Bagga, AnishCompressive Sensing for Natural Images
Baria, UmeshkumarOptical Character Recognition Robot
Barot, RakeshAnalysis of Variance for Surface Roughness Produced During Vibration Assisted Lapping Process
Reduction in Lead Time of Automated Gas Fired Kit Fitting Box Using QC Tools and Strategies.
Defects Analysis Using E Foundry and Flow Simulation for Crank Case Casting
Beravala, HardikAnalysis of Variance for Surface Roughness Produced During Vibration Assisted Lapping Process
Bhagat, UrviOptical Character Recognition Robot
Bhargav, H. A.Computational Analysis of Reciprocating Compressor Piston for Life time Performance
Design and Fabrication of Solar Parabolic Collector for Water Distillation
Bhatt, AnitaChannel Capacity of MIMO System in Rayleigh Fading Channel with Receiver Diversity Technique
Bhatt, Kamlesh DhansukhlalCorrelating Tensile Strength & Peak Temperatures for Magnesium Alloy AZ91 during Friction Stir Welding Using Varied Tool Geometries & FEA Tool
Bilodariya, BhoomikaSolar Based Electronic Fences with Wireless Iinformant
Brahmbhatt, JinishRobust Gait Recognition Technique Using Neural Network
Brahmbhatt, KetulAnalysis of Mechanical Properties of Natural Fiber Composite Beam
C
Chaudhari, AjitNumerical Analysis on Thermal Conductivity of Vapor Chamber Using an Iterative Approach
Chaudhari, UpendraDesign and Fabrication of Solar Parabolic Collector for Water Distillation
Chaudhari, VipulParametric Study and Geometrical Optimization of Centrifugal Blower
Chauhan, Jagadish KRevisiting AC bridges:A Novel Method to Measure Domestic Capacitors using Simple Techniques
Chauhan, MaheshTheoretical and Experimental Analysis of Monocrystalline Solar Cell
Chauhan, PradeepEarly Breast Cancer Detection Using Flexible Microstrip Antenn
Chauhan, PurviExperimenting and Predicting Flatness and Surface Roughness during Face Milling Operation of CF8M Grade A-351
Feeding and Gating System Design and Simulation of Flange Roller of Hydrators for Yield Melioration
Chauhan, Siddharthsingh KSimulation, Design, and Analysis of 3-Level Shunt Active Harmonic Filter using T-Typed NPC (TNPC) Topology
Chauhan, Vina D.Analysis of Bolster and Stripper Assembly of High Pressure Molding Machine
Analysis of Turn Table Assembly of Semi-Automatic High Pressure Molding Machine
Chauhan, VivekFeeding and Gating System Design and Simulation of Flange Roller of Hydrators for Yield Melioration
Chavda, NeerajNumerical Investigation of Pressure-Drop in Valve Test-Rig Design
Choksi, PinkalDesign and Fabrication of Solar Parabolic Collector for Water Distillation
Chudasama, MahipalsinhMulti-Objective Planning for Optimal Allocation of DG and RPC Units in Radial Distribution System Using Genetic Algorithm
Chudasama, Mitrajsinh JanaksinhSimulation, Design, and Analysis of 3-Level Shunt Active Harmonic Filter using T-Typed NPC (TNPC) Topology
D
Dalwadi, DarshankumarPerformance Evaluation of Mobile Charger Using Heating Technology
Performance Evaluation of Different STBC Technique in MIMO System with Rayleigh Fading Environment
Channel Capacity of MIMO System in Rayleigh Fading Channel with Receiver Diversity Technique
Darji, GauravOptimal Coordination of Directional Overcurrent Relays Using AI Algorithms and Comparison
Dave, Nisargkumar R.Simulation of Solar and Wind Power Plant Using MATLAB for Micro-Grid
Dave, VarunDevelopment of Experimental Quad Copter for Laboratory Demonstration
Deheri, GunamaniFerro Fluid Based Rough Porous Tilted Pad Bearing with Slip Effect
Desai, DhavalkumarReactive Power Compensation Using FACTS Device
Desai, KhushbooRobust Gait Recognition Technique Using Neural Network
Desai, Ruchir J.Parametric Study and Design Optimization ....
Desai, TrushantDefects Analysis Using E Foundry and Flow Simulation for Crank Case Casting
Desai, TusharAnalysis of Bolster and Stripper Assembly of High Pressure Molding Machine
Deshpande, AnuradhaThe HTS Cable Under Fault Conditions in a Power System
Dey, SayanEarly Breast Cancer Detection Using Flexible Microstrip Antenn
Dhar, SubhamEarly Breast Cancer Detection Using Flexible Microstrip Antenn
Dhobi, MihirLocation Optimization of Fixture for Gearbox Housing
Dhruv, DavitTheoretical and Experimental Analysis of Monocrystalline Solar Cell
Dronov, AlexeyThe Features of Metal-Forming Processes Modeling
Dubey, UtkarshProductivity Improvement Using Motion Study & Work Measurement in Permanent Magnet DC (PMDC) Motor
F
Fedulov, ArtemThe Features of Metal-Forming Processes Modeling
G
George, P.M.Optimum Selection of Mechanical Drives Using TOPSIS
Goradiya, Bhargav C.Performance Evaluation of Mobile Charger Using Heating Technology
Goswami, RiddhiDesign and Development of On-Board Earth Resources Detection System Based on FPGA and LabVIEW for Remote Sensing Application
Gundarneeya, TusharEvaluation of Load Carrying Capacity of Hydrodynamic Journal Bearing with Nanolubricants
H
Holia, Mehfuza S.Quantization & Speech Coding for Wireless Communication
Automatic Image Registration
Smart Cart For Accessing the Library Catalogue
I
Iyer, JyotiPlotting of Voltage Contours in P-Q Plane Using Contour Evaluation Program
J
Jain, Sweta AThree Phase Power Transformer Modeling Using FEM for Accurate Prediction of Core and Winding Loss.
Jani, DeepakNumerical Analysis on Thermal Conductivity of Vapor Chamber Using an Iterative Approach
Jani, KrushaCompressive Sensing for Natural Images
Jariya, AkilProductivity Improvement Using Motion Study & Work Measurement in Permanent Magnet DC (PMDC) Motor
Jayswal, RonakComparative Analysis of Series & Parallel Passive Filter Using PSCAD Simulation
Jobanputra, JalpaLinear Sensitivity Analysis and Series Compensation for Transmission Congestion Management
Joshi, JigneshEnergy Efficient and Secure LEACH for WSN
Joshi, ShashankLocation Optimization of Fixture for Gearbox Housing
K
Kalathiya, NiravRobo Control by Brain Signal
Karamyshev, AndreyThe Features of Metal-Forming Processes Modeling
Kathadi, Mohammedilyas I.Design and Analysis of Solid and Cross-Drilled Disc Brake Rotors
Keshwani, MukeshNumerical Analysis on Thermal Conductivity of Vapor Chamber Using an Iterative Approach
Khambalkar, MohanOptical Character Recognition Robot
Khant, RuchiAutomated Cradle
Khatri, JayAnalysis of Mechanical Properties of Natural Fiber Composite Beam
Khorev, ValeryThe Features of Metal-Forming Processes Modeling
Kotwal, ChetanLinear Sensitivity Analysis and Series Compensation for Transmission Congestion Management
Switching Overvoltages in Offshore Cable...
L
Laiwala, ForumA Novel Wideband Metamaterial Absorber for S, C & X Band with Good Absorbption
Leuva, HirenComputational Analysis of Reciprocating Compressor Piston for Life time Performance
M
Macwan, KinjalA Novel Approach for Three-Phase V/f...
Mahant, KeyurDesign and Development of On-Board Earth Resources Detection System Based on FPGA and LabVIEW for Remote Sensing Application
Makhijani, PrakashSwitching Overvoltages in Offshore Cable...
Makwana, Mahmadshafi V.Realization of Active Neutral Point Mulitilevel Inverter Using SPWM Technique
Makwana, MukeshNumerical Investigation of Pressure-Drop in Valve Test-Rig Design
Malik, SonaliThe Performance Of Solar PV Array......
Marathe, SwapnilComparative Analysis of Series & Parallel Passive Filter Using PSCAD Simulation
Mehta, AlpeshAlgae Biodiesel: A Futuristic Fuel for Power Generation and for Automobile Industries
Mehta, Dr. BhinalSmall Signal Stability Analysis of Power System with Increased Penetration of PV Generation
Mehta, NirveshAlgae Biodiesel: A Futuristic Fuel for Power Generation and for Automobile Industries
Mehta, PrarthanA Novel Wideband Metamaterial Absorber for S, C & X Band with Good Absorbption
Mehta, Rashesh P.Optimal Coordination of Directional Overcurrent Relays Using AI Algorithms and Comparison
Development of Experimental Quad Copter for Laboratory Demonstration
Mehta, ShashvatAutomated Spur Gear Designing Using Matlab
Mehta, VishalCorrelating Tensile Strength & Peak Temperatures for Magnesium Alloy AZ91 during Friction Stir Welding Using Varied Tool Geometries & FEA Tool
Mishra, NidhishSimplified Approach for the Analysis of Three-Phase Self-Excited Induction Generator
Mittal, SurbhiA Novel Wideband Metamaterial Absorber for S, C & X Band with Good Absorbption
Modi, AnkitCompact Switched Mode Power Supply for Medium Voltage Drives
N
Naik, ForamAutomated Cradle
Naik, JayDesign Of Conical Roof Structure Of Liquid Sulphur Storage Tank
Nandavana, BhavinRobo Control by Brain Signal
Nekrasov, IgorThe Features of Metal-Forming Processes Modeling
O
Odedra, Khoda N.Active Power Control of PV System in MPPT and CPG Mode
DSTATCOM for Harmonics Mitigation in 3-Phase 3-Wire Sytem
P
P. Parajpati, PankajAnalysis of Precoding Algorithms and Pilot Contamination Problem for Massive MIMO System
Panara, ViralDevelopment of Functionally Graded Metal Composite (LM25-SiC) Using Centrifugal Casting Process and their Characterisation
Panchal, JankiRobo Control by Brain Signal
Panchal, KiranComparative Analysis of Series & Parallel Passive Filter Using PSCAD Simulation
Panchal, MiteshAutomated Spur Gear Designing Using Matlab
Panchal, ParthShort Distance Wireless Power Transfer for Small Devices
Panchal, ParulRobo Control by Brain Signal
Panchal, TejendraALPR System Under Varying Illumination and Motion Conditions
Pandey, ShubhaEffective Flicker Detection Technique Using Artificial Neural Network For Video
Pandya, Akshay AThree Phase Power Transformer Modeling Using FEM for Accurate Prediction of Core and Winding Loss.
Pandya, Mahesh. HActive Power Control of PV System in MPPT and CPG Mode
Pandya, SaurabhDSTATCOM for Harmonics Mitigation in 3-Phase 3-Wire Sytem
Parekh, Bhupendra R.The Performance Of Solar PV Array......
Parmar, DavidSmall Signal Stability Analysis of Power System with Increased Penetration of PV Generation
Parmar, Hardik K.Computational Analysis of Ultrasonic Treatment of Melt for Effective Dispersion of Reinforcement Particles
Parmar, Kiran KAnalysis of Precoding Algorithms and Pilot Contamination Problem for Massive MIMO System
Parmar, NidhiSwitching Overvoltages in Offshore Cable...
Parmar, VarunParametric Study and Geometrical Optimization of Centrifugal Blower
Parshin, VladimirThe Features of Metal-Forming Processes Modeling
Patel, AjayOptimal Coordination of Directional Overcurrent Relays Using AI Algorithms and Comparison
Patel, AkashNumerical Investigation of Pressure-Drop in Valve Test-Rig Design
Patel, AmarReduction in Lead Time of Automated Gas Fired Kit Fitting Box Using QC Tools and Strategies.
Patel, AmitDesign and Development of On-Board Earth Resources Detection System Based on FPGA and LabVIEW for Remote Sensing Application
Patel, AnkitApplication of SSSC-Damping Controller for Power System Stability Enhancement
Patel, Ashish R.An Overview on Problem of Balancing Of DC Capacitor Voltage in Diode-Clamped Multilevel Inverter Using Boost Converter
Revisiting AC bridges:A Novel Method to Measure Domestic Capacitors using Simple Techniques
Analysis of Field Oriented Control Strategy for Induction Motor
Patel, BhargaviOptimize BJT for Small Dimensions and High-Frequency Analysis
Patel, ChintanImplementation of Edge Detection Algorithm Using Nexys 4 FPGA
Patel, ChiragEffective Flicker Detection Technique Using Artificial Neural Network For Video
Patel, DeepProductivity Improvement Using Motion Study & Work Measurement in Permanent Magnet DC (PMDC) Motor
Patel, Dharita K.Revisiting AC bridges:A Novel Method to Measure Domestic Capacitors using Simple Techniques
Development of Experimental Quad Copter for Laboratory Demonstration
Patel, DhavalApplication of SSSC-Damping Controller for Power System Stability Enhancement
Active Power Control of PV System in MPPT and CPG Mode
DSTATCOM for Harmonics Mitigation in 3-Phase 3-Wire Sytem
Patel, Dr. VinayDesign and Analysis of Force/Moment Sensor for a Robot
Patel, GauravNumerical Investigation of Pressure-Drop in Valve Test-Rig Design
Patel, HarshvardhanSmart Cart For Accessing the Library Catalogue
Patel, HetalALPR System Under Varying Illumination and Motion Conditions
Patel, HirenBeacon Based Positioning and Tracking with SOS
Patel, HirenChannel Capacity of MIMO System in Rayleigh Fading Channel with Receiver Diversity Technique
Patel, JatinkumarPerformance Analysis, Savings and Modifications in Compressed Air System of Manufacturing Industry.
Patel, KaranExperimenting and Predicting Flatness and Surface Roughness during Face Milling Operation of CF8M Grade A-351
Patel, KaushalAnalysis of Turn Table Assembly of Semi-Automatic High Pressure Molding Machine
Patel, KaushikaFairness and Friendliness Analysis of Most Reliable Transport Layer Protocol
Patel, KetanOptimize BJT for Small Dimensions and High-Frequency Analysis
Patel, KinjalDevelopment of Functionally Graded Metal Composite (LM25-SiC) Using Centrifugal Casting Process and their Characterisation
Patel, NikulCorrelating Tensile Strength & Peak Temperatures for Magnesium Alloy AZ91 during Friction Stir Welding Using Varied Tool Geometries & FEA Tool
Patel, PalakChannel Capacity of MIMO System in Rayleigh Fading Channel with Receiver Diversity Technique
Patel, RipalRobust Gait Recognition Technique Using Neural Network
Effective Flicker Detection Technique Using Artificial Neural Network For Video
Patel, RonakLocation Optimization of Fixture for Gearbox Housing
Patel, RutuSmart Cart For Accessing the Library Catalogue
Patel, SagarExperimenting and Predicting Flatness and Surface Roughness during Face Milling Operation of CF8M Grade A-351
Patel, Shubham R.An Overview on Problem of Balancing Of DC Capacitor Voltage in Diode-Clamped Multilevel Inverter Using Boost Converter
Patel, TarunThe HTS Cable Under Fault Conditions in a Power System
Patel, VidhiA Novel Approach for Three-Phase V/f...
Patel, Vinay J.Design Of Conical Roof Structure Of Liquid Sulphur Storage Tank
Patel, VinodSimulation, Design, and Analysis of 3-Level Shunt Active Harmonic Filter using T-Typed NPC (TNPC) Topology
Compact Switched Mode Power Supply for Medium Voltage Drives
Pathan, Mod.JishankhanProductivity Improvement Using Motion Study & Work Measurement in Permanent Magnet DC (PMDC) Motor
Patolia, HareshDesign and Analysis of Force/Moment Sensor for a Robot
Analysis of Mechanical Properties of Natural Fiber Composite Beam
Paul, RobinsonEffective Flicker Detection Technique Using Artificial Neural Network For Video
Beacon Based Positioning and Tracking with SOS
Pawar, T. D.RPCA, MRA and ICA Methods for Motion Artifact Identification in AECG Signals
Prajapati, MaluA New Symmetric Multilevel Voltage Source Inverter with Least Number of Switches
Prajapati, ShwetaPerformance Analysis, Savings and Modifications in Compressed Air System of Manufacturing Industry.
Prajapati, YogeshPerformance Analysis, Savings and Modifications in Compressed Air System of Manufacturing Industry.
Priya, SambridhiPerformance Evaluation of Mobile Charger Using Heating Technology
Puranik, SanchitRobust Gait Recognition Technique Using Neural Network
R
Ramchandani, PankajSolar Based Electronic Fences with Wireless Iinformant
Rana, AbhishekReduction in Lead Time of Automated Gas Fired Kit Fitting Box Using QC Tools and Strategies.
Rao, DeepAnalysis of Variance for Surface Roughness Produced During Vibration Assisted Lapping Process
Rathod, Dr. JagdishEnergy Efficient and Secure LEACH for WSN
Rathod, Jagdish M.Automated Cradle
Early Breast Cancer Detection Using Flexible Microstrip Antenn
Rathod, RajnikantQuantization & Speech Coding for Wireless Communication
Raval, PranavApplication of SSSC-Damping Controller for Power System Stability Enhancement
S
Samvatsar, KaustubhAnalysis of Variance for Surface Roughness Produced During Vibration Assisted Lapping Process
Sarvaiya, JaydeepsinhMulti-Objective Planning for Optimal Allocation of DG and RPC Units in Radial Distribution System Using Genetic Algorithm
Sarvaiya, ParthSmart Cart For Accessing the Library Catalogue
Sevak, MayurCompressive Sensing for Natural Images
Shah, NikeshTheoretical and Experimental Analysis of Monocrystalline Solar Cell
Shah, S. A.Computational Analysis of Reciprocating Compressor Piston for Life time Performance
Shah, UrmiSmart Cart For Accessing the Library Catalogue
Shah, VipulBeacon Based Positioning and Tracking with SOS
Shah, Zankhana H.Automatic Image Registration
Shaikh, AbdulsalamSimplified Approach for the Analysis of Three-Phase Self-Excited Induction Generator
Short Distance Wireless Power Transfer for Small Devices
Sharma, BalkrushnaDefects Analysis Using E Foundry and Flow Simulation for Crank Case Casting
Sharma, Gaurang K.An Overview on Problem of Balancing Of DC Capacitor Voltage in Diode-Clamped Multilevel Inverter Using Boost Converter
Shastri, ManankComparative Analysis of Series & Parallel Passive Filter Using PSCAD Simulation
Sheth, SaurinParametric Study and Design Optimization ....
Shukla, SnehalFerro Fluid Based Rough Porous Tilted Pad Bearing with Slip Effect
Singh, Vijaypratap R.Parametric Study and Design Optimization ....
Sinha, ManishSimulation of Solar and Wind Power Plant Using MATLAB for Micro-Grid
Sinha, Manish N.Performance Analysis, Savings and Modifications in Compressed Air System of Manufacturing Industry.
Solanki, SapanaTheoretical and Experimental Analysis of Monocrystalline Solar Cell
Soni, JatinkumarAn Experimental Analysis to Check Accuracy of DGA.....
Sutaria, MayurDevelopment of Functionally Graded Metal Composite (LM25-SiC) Using Centrifugal Casting Process and their Characterisation
Sutaria, Mayur P.Computational Analysis of Ultrasonic Treatment of Melt for Effective Dispersion of Reinforcement Particles
Suthar, BhavikPlotting of Voltage Contours in P-Q Plane Using Contour Evaluation Program
Suthar, DhavalAn Experimental Analysis to Check Accuracy of DGA.....
T
Tamboli, KetanOptimum Selection of Mechanical Drives Using TOPSIS
Tandel, KenalDesign and Analysis of Force/Moment Sensor for a Robot
Tank, VivekRobust Gait Recognition Technique Using Neural Network
Tekwani, Prof. Dr. P. N.Simulation, Design, and Analysis of 3-Level Shunt Active Harmonic Filter using T-Typed NPC (TNPC) Topology
A Novel Approach for Three-Phase V/f...
Compact Switched Mode Power Supply for Medium Voltage Drives
Thakkar, TarangSwitching Overvoltages in Offshore Cable...
Trivedi, Dhara P.Analysis of Bolster and Stripper Assembly of High Pressure Molding Machine
Analysis of Turn Table Assembly of Semi-Automatic High Pressure Molding Machine
Trivedi, MilindAutomated Cradle
Trivedi, SamirRealization of Active Neutral Point Mulitilevel Inverter Using SPWM Technique
V
Vachhani, UjashAnalysis of Field Oriented Control Strategy for Induction Motor
Vahora, AnishImplementation of Edge Detection Algorithm Using Nexys 4 FPGA
Vakharia, DipakEvaluation of Load Carrying Capacity of Hydrodynamic Journal Bearing with Nanolubricants
Vala, AlpeshDesign and Development of On-Board Earth Resources Detection System Based on FPGA and LabVIEW for Remote Sensing Application
Vala, DeepakSolar Based Electronic Fences with Wireless Iinformant
RPCA, MRA and ICA Methods for Motion Artifact Identification in AECG Signals
Optical Character Recognition Robot
Vala, SagarDevelopment of Experimental Quad Copter for Laboratory Demonstration
Vashi, RonakImplementation of Edge Detection Algorithm Using Nexys 4 FPGA
Vekariya, YoginDefects Analysis Using E Foundry and Flow Simulation for Crank Case Casting
Vithani, DhavalReduction in Lead Time of Automated Gas Fired Kit Fitting Box Using QC Tools and Strategies.
Vyas, JimitDesign and Analysis of Solid and Cross-Drilled Disc Brake Rotors
W
Wandra, Dr. KinitaEnergy Efficient and Secure LEACH for WSN
Z
Zala, Maheshwariba PradhyumansinhActive Power Control of PV System in MPPT and CPG Mode
DSTATCOM for Harmonics Mitigation in 3-Phase 3-Wire Sytem
Zinzuvadia, Mahesh JParametric Study and Geometrical Optimization of Centrifugal Blower
Design and Analysis of Solid and Cross-Drilled Disc Brake Rotors
Parametric Study and Design Optimization ....